(2) Operation
1. Insert the plug into the supply socket.
2. Press switch button. The machine will start to work.
3. You can adjust the airflow by pushing the sliding block up and down
Protective device
(1)
When the tank is full of water, this Protective Device will rise up. Suction power
will stop but an abnormal noise may indicate that the motor is running at a high
speed. If this happens, cut off the power immediately and pour out the water
from the tank. The machine will begin to work normally afterwards.
(2)
When the machine overturns or shakes excessively, the Protective Device may
not work correctly. What you should do is to switch off the machine and turn it
upright before continuing to use the vacuum.
(3)
When the tank is full of water, the Protective Device will rise up, suction power
will cut off. Pour out all the water from the tank before resuming operation.
MAINTENANCE
(1) Barrel Cleaning
* After working or when the barrel is full of dust which causes suction to decrease
considerably, you should cut off the electricity and clean the dust away from the
barrel.
1) Unfasten the locking knob, lift up the top cover.
2) Take off the filter bag, throw out the dust / dirt from the dust barrel.
3) Install the filter bag back and place the top cover.
