4/21/03
Projection Wall Mount
90-100xxx-000
Airespace Access Point Quick Installation Guide
9
Projection Wall Mount
Projection Wall Mount
When you are mounting the AP out from a wall (flat sides along the wall or
hallway), use the projection-mount L-bracket.
•
Before proceeding, gently screw the two factory-supplied screws and
spring washers into the bottom of the Airespace AP. Make sure the
spring washers have their convex (high center sections) pointing
toward the screw heads.
Note:
The Airspace AP threaded holes have precision-depth threads. Do
not overtighten the screws, or the bracket will not fit under the screw
heads.
Figure -
Assembling the Mounting Screws and Spring Washers to the Airespace AP
•
Copy the MAC address(es) from the label(s) on the AP onto the corre-
sponding location on the map. MAC addresses have the format
000B85xxxxxx.
•
You have already attached the projection-mount L-bracket to the wall
in
Step 2: Preparing Mounting Locations
.
Slide the screws into the keyhole slots on the mounting bracket as
shown in the following figure.
Note:
If the screws do not securely hold the bracket, remove the AP
and adjust the screws until they securely hold the bracket.