3
Installation Instructions:
1. Turn off power at breaker
box to avoid possible
electrical shock.
2. Pass the supply wires through the
mounting bracket. Secure the mounting
bracket to a ceiling joist or other structural
ceiling element with two screws, spring
washers and flat washers.
Note: The structural element must support
at least three times the weight of the fan.
3. Lift fan assembly onto
mounting bracket.
4. Rotate fan so that the groove on the ball
engages the ridge in the mounting
bracket.
Connect ground (green) wires
as shown.
Note:
Do not rotate the fan assembly
more than 360 degrees.
5. Make wire connections
Mounting
Bracket
Mounting
Bracket
Screw
Fan
Assembly
Ridge
Ball Groove
Mounting Bracket
Ground Wire
From Ceiling
Mounting Screw
Wall Control
Wall Outlet Box
TO FAN
TO HOT
Wall Plate
G
re
e
n
B
lu
e
B
ro
w
n
See Figure 2
(see next page)
See Figure 1
(see next page)
