Page: 6 / 8
Fig.8.
Fig.10.
Make wire connections:
1). The white motor wire to the white wire from the outlet box with a
wire nut.
2). The black motor wire to the black wire from the outlet box with a
wire nut.
3). The ground wire from the outlet box to the ground wire from the
motor with a wire nut.
*** After making the wire connections, the wires should be spread
apart with the grounded wires on one side of the outlet box and
the ungrounded wires on the other side of the outlet box.
*** After the connections have been made, the wires should be
turned upward and pushed carefully up into the outlet box.
Wire Nut
Canopy
Hang the safety cable into the safety cable hook.
( See Fig.9)
Fig. 9.
Safety Cable Hook
Safety
Cable
Canopy Screw
Canopy
140225
F A N C O
F A N C O
Tuck all wires into the canopy. Push the canopy
upwards, lining up the keyholes on the bottom with
the screws on the hanger bracket. Twist the Canopy
to lock it in place, then tighten the screws to secure it.
Fig.11.
Fig.12.
Attach nipple to the coupling, and
secure it with a hex nut. Install bulbs
(included). See relamping label at
socket area or packaging for
maximum wattage.
Attach the glass shade and metal pad
through the nipple, secure them
together with a hex nut and finial.
Socket
Bulb
Glass Shade
Metal Pad
Finial
Nipple
Fig.13
Turn ON the electric power at the
main fuse or circuit breaker box.
Hex Nut
Nipple
Coupling
Hex Nut
