F A N C O
161031
4
Remove the motor screws and washers
from the motor assembly. Secure blade
brackets to the motor with washers and
motor screws.
Attach the canopy to the hanger
bracket, then secure it with four
screws and washers.
Thread the blade screws through the
rubber washer blade bracket and blade
into the decorative cap. Tighten all blade
screws securely. Repeat on other blades.
Fig.10
Blade
Blade Bracket
Blade Screw
Fig.11
Motor Screw
Washer
Blade Bracket
Screw
Hanger Bracket
Washer
Canopy
Fig. 9
Decorative Cap
Rubber Washer
Fig.12
Switch Box
Screw
Switch Box Cover
Install without fan light
Make sure the wires of the fan light in
the switch box are capped.
Secure the switch box cover with
the switch box screws.
To install the fan light, skip this step
and proceed to Fig.13.
Fan Light Installation:
Fig.14
Switch Box
Screw
Secure the fan light onto the switch
box by using the switch box screws.
Switch Box
Fan Light
Female Terminal
Male Terminal
Fig.13
Make wire connection:
-- Connect the blue wire from the switch box to
blue wire from the fan light by inserting male
terminal into female terminal.
-- Connect the red wire from the switch box to
red wire from the fan light by inserting male
terminal into female terminal.
Carefully put the wires into the switch box.