2-‐
SWITCHING THE DEVICE HEATING ON OR OFF:
To switch on the device, briefly press the MODE button until the required comfort temperature is
displayed, that is 19.
To switch off the device, press the MODE button until the standby position is reached.
Note: the device stores all your settings in its memory, it is just on standby.
3-‐
SETPOINT TEMPERATURE SETTING:
Using the + and -‐ buttons, you can increase or decrease the setpoint temperature in steps of 1°C.
You can thus set the required setpoint temperature yourself.
Close the doors of the room and wait for a few hours so that the temperature stabilises at the
required value.
If the temperature obtained does not suit you, increase or decrease the setpoint value in steps of
1°C.
Wait for a few hours again to check the value of the comfort temperature.
4-‐
OVERRIDE IN ECONOMY MODE:
For a short period of absence (more than 2 hours), it is recommended that this operating mode be
used to obtain maximum savings. This economy position drops the room temperature by about 3°C
in relation to the setpoint temperature. To do this: Press the MODE button until the display shows
the 'EC' economy position.
It is possible to view the economy setpoint by briefly pressing on one of the + or -‐ buttons.
The economy temperature is set by default to 3°C below the comfort temperature.
49.
