AIREDALE DR Series Скачать руководство пользователя страница 5

Страница: 5 / 35

Condensers

Dry Coolers

Introduction

Dry Coolers Technical Manual 9308503 V2_06_2020

Standard Features

Construction

Unit cabinets shall be manufactured from galvanised sheet steel coated with epoxy
baked powder paint to provide a durable finish.

Standard unit colour shall be Light Grey (RAL 7035).

Dual position fixing legs shall be supplied attached to the unit via captive bolts and
shake proof washers.

Horizontal Air

Discharge

As standard, unit legs are attached and delivered in the horizontal air discharge mode as
are the isolator and fan speed controller.

The legs attached to the top of the unit are for lifting and stacking and shall be removed
and stored safely if not required.

Fan & Motor Assembly

All Models

The external rotor AC motor shall allow the use of a low power output, single phase,
and speed controllable motor to power the fan.

The motor shall have inbuilt thermal overload protection and the assembly shall be
supplied complete with a finger guard for protection.

Shall be available in either horizontal or vertical air discharge orientation,

please

specify at order

Electrical

All electrical components shall be rated for all year round outdoor use.

All wiring shall be colour coded and numbered for identification. All units shall be wired
in accordance with current local and European standards.

Main Electric Isolator

A weatherproof mains isolator shall be fitted to ensure complete unit isolation of the
electrical panel during adjustment and maintenance.

IMPORTANT

Only 2 units may be stacked together.

Vertical Air Discharge

As standard, unit legs shall be attached and delivered in the horizontal air discharge
mode and shall be repositioned on site to offer vertical air discharge mode, refer to

Dimensions / Weights / Positioning

, for details.

To ensure the unit isolator and fan speed controller are in the correct orientation for vertical air
discharge please specify at order.

Содержание DR Series




































Результаты поиска

Содержание DR Series

Отзывы:

Бренды по названию

Популярные бренды

AIREDALE DR Series, Техническое руководство

Результаты поиска

Содержание DR Series

Отзывы:

Бренды по названию

Популярные бренды