O RACO V E R Covering
03
as you can. Make sure you have a flat
Heavy duty servo wire extensions. EG
damage and report any issues to EG as soon
Included Features:
•
Carbon Fiber Wing and Stab Tubes
•
Carbon Fiber Reinforced Wing and
Fuselage Spars
•
Airfoiled Composite Landing Gear
•
Included Servo Clips
•
Complete Hardware Package
•
Carbon Fiber Tail Wheel Assembly
•
4 1/2" Aluminum Spinner Included
•
Long Aluminum Servo Arms
Included
•
Advanced Ball Links and Pushrods
•
Pre-installed Fuel Tank
•
Items Required to Complete This Model:
•
85-100 cc gas engine with stock or
aftermarket exhaust systems
•
Appropriate propeller for your engine
•
All required engine and exhaust mounting
hardware
•
Ignition battery and switch
•
One quality throttle servo and appropriate
servo arm
•
Six high quality metal gear servos of 180 in-
oz or better for the ailerons and elevators
•
One or two high quality rudder servos
totaling at least 330 in-oz or better
•
Appropriate servo arms for the above
•
recommends two 36”, two 18”, three 12”,
two Y-harnesses, two 6”, two 6” extensions.
Your installation though may vary.
•
Two heavy duty switches with charging
jacks for the Rx
•
Two high quality Rx batteries of significant
capacity to power your choice of servos.
•
One Receiver of your choice
Shop Supplies/Tools
•
Covering Iron and heat gun
•
Assortment normal hobby tools such as
screwdrivers, hobby knife, drill and drill
bits, pliers, etc.
•
Thick and Thin CA adhesives
•
30 minute Epoxy
•
Isopropyl alcohol
•
Ruler or tape measure
•
Blue thread-lock or equivalent
Note: As with all kits, it’s a good idea to read all the instructions and study the parts
before you begin construction. Handle the parts of this kit with care so you do not
damage any of the structure or covering. Inspect all the parts for any shipping
and sturdy workbench and follow all safety advice for the tools and adhesives you
plan to use.
