Aircotec XC-trainer Series, Руководство пользователя

Страница: 12 / 41

Manual V1.00_2009_V5
2. XC-Trainer Firmware
2.1 Firmware Version V1.00 -2009
Info for version Firmware may be found at www.aircotec.com
2.2 Flight Recorder
The integrated flight recorder saves position, altitude, climb/sinkrate,
SOG, TAS (with speed sensor), heading and temperature (only XCT-
Easy+) every second for up to 18 hours
2.3 Waypoints
3 Waypoint can be stored
2.4
Available data in the display
2.4.1
Permanent displays
Speed SOG and TAS (TAS with sensor attached), altitude,
climb/sinkrate and heading. Wind speed and –direction
Graphical speed distribution curve with head- and tailwind indication,
distance to turnpoint, local time and elapsed time since launch
2.4.2 Additional information in the BaroCompass mode
Flight direction in Track UP, distance and bearing to next waypoint or
to a MARK. Glide angle from the last 5, 10 or 30sec.
Show the Compass.
2.4.3 Additional information in Thermal mode
Flight direction in Track UP, distance and bearing to next waypoint or
to a MARK. Graphic climb rate distribution with wind drift
compensation. Resolutions 1km x 1km, 2km x 2km
2.4.4 Additional information in the Vario mode
Analogue vario bar with 0-5m/s and 5-9,5 m/s resolution, Digital Vario
from +-25 m over pressure sensor and +- 90m over GPS altitude.
Distance and heading to next waypoint or Mark. Large Digital Vario
display, large altitude display, null able altimeter ALT0 average vario
for the last 10, 20 or 30 seconds, Glide angle for the last 10 sec.
Page 12