aircon MDV DCTB-24R32IVT IN, Руководство пользователя

Страница: 70 / 84


Strona 70

9. OPERATION
Faceplate function (on some models)
1.When the unit is off
，
Press the MODE button long to activate the faceplate
function.The mark will flash.
2. Press the button “+” and “-” to control the lift and drop of the faceplate.
Pressing the “+” button can stop the faceplate,while it is dropping.
Pressing the “-” button can stop the faceplate,while it is lifting.
The F2 mark appears when
the faceplate is adjusted.
MODE
Left-Right swing (on some models)
Press the button to start Left-Right swing function.
Press it again to stop.
When the Left-Right swing function is activated, the mark appears.(Not
applicable to all the models)
SWING SWING

Strona 71

9. OPERATION
Up-Down airflow direction and swing (on some models)
1.Press the button every time, the louver swings 6 degrees.
2.Press and hold the button for 2 seconds,it turns into up-down swing mode,
press ti again to stop.
When the Up-Down swing function is activated,the mark appears. (Not applicable
to all the models)
The operation can refer to the following instructions for the unit with four Up-Down
louvers can be operated individually.
-0
-1 -2 -3
-4
1.Press the button to activate the Up-Down adjusting
louver function.
The mark will flash.(Not applicable to all the models)
2.Pressing the button “+”
or“-”
can select the movement
of four louvers.Each time you push the button,the wire
controller select in a sequence that goes from:(the icon
means the four louvers move at the same time.)
3. And then use button to adjust the Up-Down airflow direction of the selected
louver.
-0
SWING SWING
SWING SWING
Use button to adjust the Up-down airflow direction.