Aircatglobal Virtualfly V3RNIO Скачать руководство пользователя страница 5

Страница: 5 / 5

V3RNIO / | User’s manual

3.2 Using an alternative joystick

configuration

Since the V3RNIO/ interacts with any computer

as a joystick (HID), it is compatible with any flight simulation

software. Below, you have a general scheme for setting

up your V3RNIO/ with the most popular flight

simulation software: MSFS, Prepar3D, and X-Plane.

MSFS

Assign the axes inside the controls menu, and the V3RNIO/

will be ready to be used.

Finally, restart MSFS and verify that the device is configured

correctly.

Prepar3D

Open Prepar3D and go to the controls menu. Inside, select

the ‘V3RNIO/’ from the devices list. Assign the

axes as you please. Then calibrate the device following the

instructions.

Finally, restart Prepar3D and verify that the device is

configured correctly.

X-Plane

Your V3RNIO/ needs to be calibrated inside X-Plane

since axes are automatically assigned. Open X-Plane, go to

Configuration\Joystick, and follow the calibration steps for

your device.

Finally, restart X-Plane and verify that the device is configured

correctly.

Содержание Virtualfly V3RNIO





