Airbus A320-214 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 33

Airbus A320-214 Скачать руководство пользователя страница 13

2020/12/07 15:07

13/33

Airbus A320-214

Aeroﬂy FS Wiki - https://www.aeroﬂy.com/dokuwiki/

Landing Checklist

Let's quickly check that we didn't forget anything. The A320 has a nice built in checklist for this.
Check that there are no blue items remaining on that list.

The aircraft is now prepared for a fully automatic landing.

Tip - If you want to return to this state you can exit to the main menu, then open the location dialog
and click the yellow aircraft symbol on the map approaching San Francisco Runway 28R.

Flare

The autopilot will start the ﬂare at about 30 ft above the runway and will try to touch down gently. At
ten feet you should retard your throttle to idle.

Landed, Disengage Autopilots

The auto-brake slows us down and we come to a complete stop on the runway.

Press the autopilot disengage button if you have it assigned or click the side stick of to your left
to kick out the autopilot.
To be able to vacate the runway advance your throttle a bit, this should also disengage the
auto-brake.

Congratulations, you just completed your ﬁrst A320 ﬂight and landed in San Francisco!

A320 Advanced Tutorial

We just experienced how easy it can be to ﬂy an airliner with all the automation helping us. But we
sort of skipped the whole procedures for setting up a ﬂight plan with the on-board computers (MCDU),
preparing the aircraft for takeoﬀ and all the checklists and the powerful auto-ﬂight (auauto-
thrust) system.

A320 Autopilot Introduction

The Airbus A320 autopilot in the Aeroﬂy FS 2 is an realistic simulation of the real world autopilot.

«
...
11
12
13
14
15
...
»

Содержание A320-214


































Отзывы:

Нет отзывов