• Single action trigger
• 3, 5 & 13cc Metal reservoir cups
• 0.3, 0.5 & 0.8mm Fluid nozzle
• 50 Psi maximum
• 1/8th” BSP (9mm) & 5mm screw connectors
Specifications
7
Trouble Shooting
PROBLEM
Medium leaking.
Poor medium
atomization.
Air bubble(s) in the cup.
Medium leaks from back.
Air leaking
Medium spatter.
CAUSE
Head of needle bent or
distorted.
Nozzle and needle not
fully contacted.
Airbrush nozzle is
partially blocked.
Needle screw loose.
Faulty nozzle seal ring
causes air blowback.
The gap between needle
and its seal is enlarged.
Valve lever stuck
Bent needle tip.
SOLUTION
Repair or replace parts.
Loosen screw, make
sure nozzle and needle
fully contacted and then
screw tightly.
Wash nozzle with
relevant cleaner.
Make sure screw is
tight.
Replace nozzle seal ring.
Take off parts on the
back, fasten screw or
replace the seal.
Take trigger off; apply
lube after cleaning and
put trigger back.
Replace needle.
After Sales Support
UK/N.IRELAND HELPLINE N
O
:
WEBSITE:
EMAIL:
01270 508530
www.airbrushheaven.co.uk
