6. Downloading data from the DATAFLOW
Make sure the application is open on the computer. Connect the USB cable to the
computer and to the pump.
Press
start/pause
to switch on the unit. The display will show (in this order) the serial
number, the current firmware version and
USB Connected
.
6.1 Download Test Data
Press the
Download icon
(see
1.4
) on the application interface. A new window opens
showing a list of the saved jobs on the pump.
11
7. Configure unit storage
The DATAFLOW can store a large number of jobs in it’s memory. The application
interface will show how many jobs are stored and how much memory has been used
and is left.
You can easily manage this memory by clicking on the
Settings
button (see
1.4
). This
brings up a new window where you can erase the complete device data.
Caution:
Make sure you have downloaded and saved the test data for each job before
you erase the complete memory.
12
The DATAFLOW pump has been specifically designed to make replacing the battery
a quick and easy task. Simply half turn the two screws on the front of the battery
housing, pull off the terminal connectors, remove the battery and replace.
NOTE: This is made easier if you lay the pump on its back.
IMPORTANT: The terminals on the battery are colour coded red and black to match
the red and black wires of the unit. When fitting a new battery make sure that these
match up correctly. For additional safety this is fuse protected by a PTC resetting fuse.
8.2 Replacing the mast
The mast is secured on the unit in a threaded housing, so to replace just unscrew and
remove. We would also recommend removing the mast when cleaning the unit (8.3).
8.3 Cleaning the unit
The casing of the DATAFLOW pump is made from a hard wearing ABS structural
foam, making it incredibly rugged and also very easy to clean. Tested to IP65
standards (‘
Protected against low pressure water jets from any direction
.’) the unit can be
cleaned under a shower hose.
8
.
Maintenance
8.1 Replacing the battery
Click on the correct job number and choose a file format (XLS, PDF or CSV) to
download.
