EN
Connection to WiFi – control by app
You can use the application on your smartphone or tablet (iOS, Android) to control the
device. Before the device can be controlled via the application, it is necessary to
configure the device and allow it to connect to a WiFi network. Instructions for
application and setup of the device can be found at www.airbi.cz/space-wifi
Product care and maintenace
Warning
:
Ensure to disconnect the power before cleaning and maintenance.
Pre-filter
(every 15 days)
•
Please use the vacuum cleaner to clean
the dust on the surface of the screen or
wash with water, dry throughly.
HEPA / carbon filter
(every two months)
•
Use the vacuum cleaner to clear the dust
on the surface of the screen.
•
Place the filter into the ventilated place.
Don't expose under the strong sunshine.
•
Do not use water to clean the filter.
Particle sensor
(every two months)
•
Remove sensor’s cover.
•
Use a dry cotton swab to clean sensor.
•
Regularly clean the sensor from dust.
•
Use the flashlight if you do not see the
sensor
Air outlet and ionizer
(every two months)
•
On top grid find symbol
.
•
Lift the side with this symbol and
carefully remove the grid.
•
Use the vacuum cleaner and collect dust
from top of the unit.
•
Ionizer is located at the air outlet at the
top of the instrument (side with the
symbol
). If you do not see the
ionizer, use a flashlight.
Page 6 of 8
