EN
3.3 Getting started
Before first use, allow the device to adjust room temperature at least half an hour. The device is
recommended for use in the temperature range 5-40 °C and relative humidity less than 80%.
1. Place the device on a flat surface.
2. Remove the upper part of the humidifier and fill the lower part with water (water
temperature should not exceed 40
o
C) up to the MAX line on the front of the humidifier.
Then return the top of the device to its original position.
3. Connect the power adapter to the back of the humidifier and then connect the adapter to the
power supply plugs. The device beeps once briefly and the POWER button (A) lights up on
the display - the device is in standby mode.
4. Press the POWER button to start the device and the relative humidity value will appear on
the display.
5. By repeatedly pressing the HUMIDITY button (B), it is possible to set the target humidity
on the device, from 30% to 80% relative humidity, always in steps of 10%. To deactivate
this function, press this button repeatedly until "- -" appears on the display.
6. By pressing the MIST button (C) repeatedly, one of the four operating modes can be set.
The mode indicator on the display changes accordingly:
▪
- low level
▪
- middle level
▪
- high level
▪
A – automatic mode – the device itself regulates the power level according to the
target humidity
•
if difference between actual and target humiditiy is 16 % or bigger – high level
•
if difference between actual and target humiditiy is between 10 % and 15 % -
middle level
•
if difference between actual and target humiditiy is between 1 % and 9 % - low
level
•
if difference is less than 1 %, humidifier will switch off
7. By pressing the TIMER button for setting the timer (D), a timer can be activated on the
device, which will switch off the device after the set time has elapsed. The timer can be set
to 2/4/8 hours. To turn off the timer, press TIMER repeatedly until 0h appears on the display.
8. Hold down the TIMER button for 2 seconds to switch to night mode. The humidifier
switches to low power and the display switches off. Only the Wifi indicator (F) will light up
on the display. Press any button to reactivate the display.
Page 6 of 9
