AirBench FPT209084, Эксплуатация и обслуживание, Страница: 15 / 18

© Copyright AirBench Ltd 2019 Page 15 of 18
ACCESSORIES
Some accessories are only supplied if specified with purchase.
Filter Pressure Gauges
A filter pressure gauge is fitted as standard to the front of each AirBench. This indicates performance of the unit
as a whole, and filter condition. Certain models show a red zone on the filter gauge; when the gauge indicates
within this zone, filters may be blocked or require cleaning. Turn the AirBench off and inspect the filters.
Where no red zone is shown, a filter inspection pressure drop will be recorded on the Commissioning
Certificate. When pressure loss is greater than that shown on the Commissioning Certificate, follow the above
procedure.
A high pressure reading may also indicate a blocked surface. Inspect the surface for blockages and clean if
required. Do not operate AirBench continuously with more than 75% of the surface blocked.
Hours Run Meter
The meter is not resettable and operates at all times when the speed control or switch is powered.
Wheels
Standard industrial rubber wheeled swivel castors are used. The two front wheels are lockable. Lock by
pressing on the lever and trip by flicking (models and operation vary slightly). Do not attempt to move while
brakes are on.
Compressed Air Interlink
This option ensures the safety of operators by preventing the use of air tools without extraction being
operational; and reduces energy use by switching off the fan after 5 minutes of non-use.
4 off series 19 airline connectors are provided to the front or side of the unit and an internal timer fitted, pre-set
to an agreed value
– usually 5 minutes. The control panel is supplied with an additional Red / Green push-
button.
System control will be as follows:
Switch main on/off switch to On – system is energized. Airline is switched to operational.
Press green button – fan starts and runs for 5 minutes.
Use airline or press green button again – timer is reset for a further 5 minutes.
Press red button – fan stops, airline stops.
The timer can be re-set to a different interval; contact the manufacturer for details.