
7
Installation Instructions
1. Pull the front panel and extract upward.
2. Turn the buckles and take out both pieces of filter.
3. Remove all packaging bags.
4. Put Filter 1 (Activated Carbon Filters) back into the product.
5. Put Filter 2 (HEPA Filter) back into the product.
Note: Please ensure that the tab (ribbon) side is facing you.
6. Make sure that the filters are installed in position. Turn the buckles to fix the
Filters.
7. To install the front panel, put the bottom into the host buckle and close the
Front panel. The front panel will be held by built-in magnets.