8
Parameter
Description
Value
Range
Delay
Click the button next to the effect name to enable or
disable delay.
Off, On
Time
Amount of time between the dry signal and the
delayed signal.
1/16 – 16/4
Feedback
Amount of signal fed back into the delay line.
0–100%
Reso LP Freq
Low pass frequency for feedback resonance.
100 – 16000 Hz
Reso Bell Freq Center frequency for feedback resonance.
100 – 16000 Hz
Reso Bell Gain Amount of gain applied to the resonant frequency.
0–100%
L/R
Ratio
Reduces the delay
Time
in either the
Left
or
Right
stereo field. This is useful for creating offset, panned
delays.
50:100 – 100:100 –
100:50
Mix
Wet/dry amount of the delay effect.
0–100%
Spring Reverb
Click the button next to the effect name to enable or
disable spring reverb.
Off, On
Pre-Delay
Length of time between dry signal and reverberated
signal.
0 – 250 ms
Time
Length of reverb tail.
1.00 – 10.00 s
Lo Cut
Center frequency for reverb signal low-cut filter.
20 – 1000 Hz
Diffusion
Rate of increasing density of reverb reflections.
At lower settings, the sound of individual reflections is
more present.
At higher settings, reflections are more uniform.
0–100%
Width
Stereo width of reverb signal. Higher values give wider
stereo separation.
0–100%
Mix
Wet/dry amount of the reverb effect.
0–100%