XT-400/800 Operating Instructions
9
It is not recommended to enter a high ozone environment.
The room may have an obnoxious “bleach-like” odor at first, but after airing the room out
it will smell much fresher than before the treatment.
Although the XT-400/800 has a high ozone output of 400/800 mg. per hour, severe
odors or larger areas may require the use of a larger ozone generator.
Please note that areas can ONLY be sanitized of bacteria and mold by the use of
High Ozone Treatments and that air purification levels of ozone will not sterilize
environments.
HIGH OZONE TREATMENTS CAN ONLY BE PERFORMED IN ROOMS THAT ARE
UNOCCUPIED OF ALL PEOPLE, PLANTS, OR ANIMALS.
Maintenance
The model XT-400/800 ozone generators incorporate a patented method of corona
discharge ozone generation that requires almost no maintenance.
ALWAYS unplug the unit before cleaning. The outside of the unit can be cleaned with a
moist paper towel. A small vacuum attachment can be used to gently vacuum the dust
that may accumulate in the vents of the unit.
Please be very careful not to poke anything in the holes of the unit when doing this.
High voltages exist and can cause a shock if objects are placed in the top holes of the
unit.
A special steel element cleaning tool has been included with your unit. It can be used to
push any dirt out of the elements. The ozone generator should also be set to its highest
