21
20
5
5-
-7
7.. EErrrro
orr o
oc
cc
cu
urrrr d
de
ette
ec
cttiio
on
n
When the brain in the vehicle cannot execute the command,
icon with one of the following reasons may be displayed.
①
:Door-open/close commands, or door opened on starting
②
:Starting failed(including terminal starting/reserved starting)
③
:In case of door-open command, the codes of the terminal and
the brain are inconsistent.
(This is generated when it moves from non-coverage area
to coverage area. With restarting, it can work again.)
④
:'Safe mode' not executed, for manual-gear type car
(See page 22)
⑤
:Door-open/close commands, or bonnet opened on starting
⑥
:Stop starting failed
⑦
:Door-open/close commands, or trunk opened on starting
⑧
:Error on memory in Brain (Check on mounting point)
⑨
:TACH not executed (Check on mounting point)
⑩
:Error on memory in terminal (Check on mounting point)
⑪
;Brake signal required to check
⑫
:Key required to check
⑬
:Engine required to check
The icon on the LCD corresponding to the received alarm blinks
until user acknowledges it.
If user does not press acknowledge key after alarm status occurs,
the alarm status will last and the clock will be stopped indicating
the time when the alarm occurs to notify the status of the vehicle
even if the reason that caused the alarm has been removed.
In addition to that, a warning tone will sound every minute.
T
ip
5. Alarms
5
5-
-1
1.. W
We
ea
akk ssh
ho
oc
ckk d
de
ette
ec
cttiio
on
n
It is the preliminary impact alarm such as strong wind, weak
external impact, and light contact by the pedestrians.
When a weak impact is detected, the terminal LCD shows impact
receipt sign (with four arrows), and alarm sounds in the car and
the terminal.
5
5-
-2
2.. SSe
erriio
ou
uss ssh
ho
oc
ckk d
de
ette
ec
cttiio
on
n
When strong impact is detected, impact receipt sign (with numbers
of arrows surrounding the car) is displayed, and alarm sounds both
in the car and the terminal.
(If you set the impact sensor to sensitive, the alarm may be
activated too often against weak impact.)
5
5-
-3
3.. D
Do
oo
orr o
op
pe
en
n d
de
ette
ec
cttiio
on
n
If the door is opened accidentally or by force in Alarm mode, the
door icon flickers on the terminal LCD, and alarm sounds both in
the car and the terminal.
5
5-
-4
4.. EEn
ng
giin
ne
e sstta
arrtt d
de
ette
ec
cttiio
on
n
This alarm shows that the car is started remotely or by the timer
in Alarm mode. If the car is started, the taillights flicker and wheels
turn on the terminal LCD. The alarm sound will occur remote and
car at the same time
5
5-
-5
5.. H
Ho
oo
od
d o
op
pe
en
n d
de
ette
ec
cttiio
on
n
If the hood of the car is opened accidentally or purposely in Alarm
mode, the hood icon flickers on the terminal LCD, and alarm
sounds both in the car and the terminal.
5
5-
-6
6.. TTrru
un
nkk o
op
pe
en
n d
de
ette
ec
cttiio
on
n
If the trunk of the car is opened in Alarm mode, the trunk icon
flickers on the terminal LCD, and alarm sounds both in the car and
the terminal.
Alarm sounds to warn an unexpected external shock to the vehicle regardless of
the remote control operation.
The icon on the LCD corresponding to the received alarm blinks
until user find it and press any button to confirm it.
T
ip
