For technical problems, please contact the Air-Vac technical service department at:
Air-Vac Engineering Company, Inc.
30 Progress Avenue • Seymour, CT 06483
Phone: 203-888-9900 • Fax: 203-888-1145
e-mail: [email protected] • www.air-vac-eng.com • 03/26/01
Section 1.0
Motor Driver Replacement
Replacing your Z-axis or vision system motor
driver controller
Metric Allen wrenches
American Allen wrenches
Vision driver part no. 9002.11.005
Z-axis driver part no. 9002.11.006
CHECKLIST:
The following items will be needed in this section.
Read instructions thoroughly before beginning.
BEFORE YOU START:
DRS24C Series
POWER DOWN DRS24 AND DISCONNECT
FROM POWER SOURCE.
ELECTRICAL WARNING:
The two motor drivers look the same, but they
are not interchangeable!
NOTE:
☛
OBSERVE PROPER STATIC PRECAUTIONS.
CAUTION:
!
☛
