Air Uno Diamond 60, Инструкция по установке и эксплуатации

Страница: 11 / 28

11
5.10.2 Selecting a Timed Zone
When the timer is waiting for a zone selection, the
timed zone is selected by pressing any zone key. A
beep sounds and the LED next to the zone display
starts blinking if no power level is selected, or is on if
any power level is selected. The timer display starts
blinking indicating that the time has to be selected.
Fig 15
The user can select only one zone at a time. The
zone selection can be done beginning from timer off
status.
The zone must always be selected before the time s
set. If when the timer is waiting for zone selection,
the timer [+TIMER] or [
- TIMER] key is pressed, the
timer is switched off. If the zone is not selected in 10
seconds, the timer is switched off.
5.10.3 Selecting the Time
When the timer is waiting for a time selection, the
timer value can be selected between 1 and 99
minutes by touching the [+TIMER] or
[ –TIMER] keys.
If the [+TIMER or [ - TIMER] key associated with the
timer is held down, the changed speed is increased
automatically. This makes it possible to reach the
desired time setting quickly.
Fig 16
If the time is not selected in 10 seconds, the timer is
switched off. If the selected time is
“00” after 10
seconds the timer is switched off.
5.10.4 Starting Timer Countdown
The countdown starts 10 seconds after the last
operation over the [+TIMER] or [
- TIMER] key. A beep
sounds and the timer display stop blinking and the
zone LED stops if any power level is selected.
Fig 17
The last minute will be displayed in seconds.
5.10.5 Changing the Time
When the timer is in countdown the user can
change the time at any time by touching the
[+TIMER] or [
- TIMER] keys, the countdown stops
and the timer changes to time selection status.
5.10.6 Timer Countdown End
When the time set on the timer has run out, the
timed zone is switched off, the timer display and the
timed zone LED starts blinking and a timer alarm
beep sounds for one minute.
Fig 18
The timer alarm can be cancelled by the user at any
time, even during the first minute of the alarm.
When the timer is in alarm status, by pressing any
key of the touch control the timer is switched off.
Fig 19