3
INSTALLATION
WARNING! IF THE MOUNTING PLACE IS LOCATED AT HIGH ALTITUDE, PLEASE REFER TO A MOUNTING COMPANY POSSESSING
APPROPRIATE MOUNTING EQUIPMENT!
Installation is shown on the example of the 300 ventilation hood.
For t
ype
1000 units, two hoods must be installed.
Route the air ducts outside of
the outer wall on which the
hood will be installed.
Cut the excess of the air ducts.
10-12 mm
Disassemble the hood to enable
access to the fastening holes.
Remove the screws that secure
the front part of the hood and
remove it.
Mark the holes using the back
part of the ventilation hood.
Drill 4 holes for the dowels.
Fix the back part of the hood to
the wall.
Install the front part of the hood
and fix it with screws.
