PNEUMATIC LOCKING DEVICES
9700 SERIES LOCK:
Remove one side cover plate and lubricate the deadbolt shaft and
cam surface. Lubricate the latchbolt shaft and the stop sides of both
bolts.
9700P SERIES LOCK: (PARACENTRIC KEYING)
Remove one side cover plate and lubricate the deadbolt shaft and
cam surface. Lubricate the latchbolt shaft and the stop sides of both bolts.
KEYS AND LEVER TUMBLERS:
1) Key wear can cause improper operation of the lock and may damage
the lock's lever tumblers. Keys in constant use should be periodically
compared to a similar new key. When grooves due to wear are noted in
the steps on the key bit, the old key should be replaced.
2) When rekeying is performed, new tumbler stacks should be purchased
as a set including a new key. This enables Airteq to maintain complete
keying records.
WARNING:
1) Never use WD40 or similar silicone based lubricants.
2) Never use graphite powder as a lubricant.
3) Never lubricate the lever tumblers.
ALL LOCKS:
2. RECOMMENDED LUBRICANTS:
Multipurpose teflon based grease: Lubricate internal moving parts with
SYNCO SUPER LUBE WITH TEFLON or equivalent.
Stick lubricant: Lubricate the beveled surfaces of all latch bolts and strikes
with stick lubricant as required. Use PANEF WHITE STICK LUBRICANT
WITH SILICONE or equivalent.
B. Electrical:
1. The electrical system of this lock is operated on regulated 24VDC
current. Any other voltage or current condition is not acceptable
and will result in failure of the solenoid.
9000 Series Lock Maint 1-7-2000.pm6
