Air Techniques ScanX Classic, Инструкция по эксплуатации

Страница: 14 / 28

Air Techniques, Inc. Page 14
Classic, Ortho & Intraoral
CONTROLS & INDICATORS
Control Switch and Indicator Functions
Item Function
POWER Switch
Toggles between the Standby and Ready mode as follows:
1. Press to switch from the Standby mode to the Ready mode.
2. Press and hold down for 2 seconds to switch to the Standby mode from the
Ready mode.
POWER Status LED
Indicator
Displays the device status as set by the POWER Switch:
1. Illuminates dim amber to indicate that ScanX is the Standby mode of operation.
2. Illuminates blue to indicate that ScanX is the Ready mode of operation.
3. When extinguished, it indicates that AC MAINS are interrupted and no operat-
ing power is present.
ERASER Switch
Note: The switch has no effect once the plate scanning
operation begins.
Enables or disables the erase function operation:
1. Press and hold for 2 seconds to disable the erase function completely.
2. Press and hold for 2 seconds a second time to enable the erase function.
ERASER Blue Status
LED Indicator
Displays the erase function status as set by the ERASER Switch:
1. Extinguished when the AC MAINS are interrupted. No power.
2. Extinguished when the system is set to the Standby mode
3. Illuminated blue when the In-Line Erase function is enabled.
(Default mode has eraser enabled.)
4. Flashing blue when the In-Line Erase is disabled.
Numeric Lane Indicator
with Visual Pointer LED
Indicators
(Bi-Color LEDs)
Displays the operational status of each scanner lane:
1. Extinguished when the AC MAINS are interrupted. No power.
2. Extinguished when the system is set to the Standby mode.
3. Extinguished when ScanX is not activated by imaging software on the host
computer. (Imaging software not set to acquire images.)
4. Illuminates green when activated by imaging software denoting that the imag-
ing software is set to acquire images and the corresponding lane is ready to
process a PSP plate.
5. Illuminates amber while the corresponding lane is busy processing.
Figure 3 . Front Panel Control and Indicator Locations
POWER
Switch / Status LED
Indicator (blue / amber)
ERASER
Switch / Blue Status
LED Indicator
Numeric Lane
LED Indicators
(green / amber)
Visual Pointer
LED Indicators
(green / amber)