Mojave LT Motor Replacement Kit
Part No: H4150 and H4151
Replacement
Instructions
©
2019 Air Techniques, Inc. • P/N H4150-LIT, Rev. B - March 2021
1295 Walt Whitman Road
|
Melville, New York 11747- 3062
Phone: 800-247-8324
|
Fax: 888-247-8481
Website: www.airtechniques.com
Introduction
This document provides instructions for using replacement kits (P/N H4150 and H4151)
to replace a motor assembly of a
MOJAVE LT Dry Vacuum System.
Important Information
Service Personnel
All personnel servicing the MOJAVE LT system must read and understand the Operator's Manual
before operating or performing any service of the unit. Only a trained technician from a qualified Air
Techniques dealer should perform any service.
Power Removal
Never work on equipment connected to live power. Remove power by disconnecting mains
power to the unit prior to performing any replacement procedures.
Motor Replacement / Refurbished Kit Components Supplied
1.
Turn power to the device OFF.
2.
Remove any hoses connected to the motor exhaust port.
3.
Disconnect the brown MOTOR and orange MOTOR FAN circular connectors from the back of the electrical box by
loosening the locking ring closest to the electrical box on each connector.
Motor Replacement Procedure
Replace the faulty motor using the replacement or refurbished motor by performing the following steps.
Motor Assembly
A
Mojave LT Front View
Motor
Exhaust Port
Motor Exhaust Connection
Mojave LT Rear View
MOTOR and MOTOR FAN Connections
Orange
Brown
