Cleaning
AHPCO
®
Cell Replacement
6
Turn power off and unplug power source before cleaning any part of the
Mobile Sanifier
®
.
Use a damp cloth to remove any dust from the outside of the unit. Never use
abrasive materials or harsh cleaners. Never spray cleaner or water directly on or
inside unit.
The filter should be cleaned every two months or sooner when used in areas with
higher particulate levels.
Filter Cleaning:
1. Remove filter by sliding it towards the
back of the unit.
2. Use water or compressed air to re-
move dust and other particles from
filter.
3. Pat the filter dry and slide back onto
unit. Never place a wet or damp filter on unit.
The Air Oasis Mobile Sanifier
®
contains an AHPCO
®
Cell which requires annual
replacement. Failure to do so will weaken the units ability to function properly.
Turn power off and unplug power source before replacing AHPCO
®
Cell.
Mounting Directions and Operation
Operation
Mounting Directions
1. Using a Phillips screwdriver remove screw holding the AHPCO
®
Cell access
panel in place. (Figure 1)
2. Lift up on tab at front of the AHPCO
®
Cell access panel and remove it from
the unit. (Figure 2)
3. Firmly grasp tab in middle of AHPCO
®
Cell and pull the AHPCO
®
up and out
of the unit. (Figure 3)
4. Reverse steps 1 through 3 to insert the new AHPCO
®
Cell.
Figure 1
Figure 2
Figure 3
