Quick Start Guide
Wi-Fi Functionality using the Control Panel
Viewing Wi-Fi Status
1.
Press Smart Mode button once at standby (power plugged-in but
not operating).
The iAdaptAir will display its current Wi-Fi status via these air quality
indicators:
Green Flashing Happy Face
=
Wi-Fi is not connected
Solid Green Happy Face
=
Wi-Fi is connected
Red Frowning Face
=
Wi-Fi is disabled.
2.
Hold the button for more than 3 sec., it will reset the Wi-Fi network
name and password.
3.
The status will show for 1 min. and then return to normal
automatically.
IMPORTANT:
Don’t reset the device by step 2 if device is still
registered in the APP. You will need to delete the device from APP
before restarting.
8
2
4
Best practices for extending filter life
Keep your unit on smart mode.
Always use the timers.
Don't use the air purifier more
hours than needed.
Use the scheduler in the app.
Turn Wi-Fi On/Off
Hold Fan Speed button
for more than 3 sec. at
standby mode. The Wi-Fi
will turn off. The Wi-Fi
status will be shown by
the red & green LED for
one min. Unplug the unit
for 5 seconds and the
Wi-Fi will automatically
restart after the unit is
plugged back in.
