22
USA
5938 027 00
4.3.9 UTILITIES
- Switch on the oven by pressing button
I
.
- Set a cooking cycle for the following UTILITIES:
UTILITIES with cycle presetting;
this is not necessary for the other utilities as they are already
specific cycles.
- Press button
U
(UTILITY):
U
(UTILITY)
- The green UTILITY LEDs will light up and one will be flashing.
E.g.:
UTILITY selected
(flashing GREEN LED)
- Turn the knob clockwise or counter clockwise to select the utility
required - the relative LED will flash (flashing GREEN color).
- Press button
U
until the flashing LED relative to the UTILITY
selected changes colour (flashing ORANGE color).
- Wait a further 5 seconds for the LEDs relative to the selected
utilities to illuminate steadily (steady ORANGE color).
- Finally, start the cycle by pressing the START/STOP button.
A complete description of the different UTILITIES available is
included in heading 3.4 SPECIAL COOKING MODES (page 20).
Note:
If the
UTILITIES
are not used for 7 seconds they are
automatically cut out
, signalled by the relative button switching
off.
- To
cancel one
of the following preset
UTILITIES
(ORANGE
steady):
press the
U
button and turn the knob to select it so that it flashes
(ORANGE flashing).
Press the
U
button again so that the UTILITY changes colour
(GREEN flashing) and is thus cancelled.
- To
cancel
the other
UTILITIES
set another cooking cycle.
In case of
cycle already started
, stop it, keeping the START/
STOP button pressed for 2 seconds before cancelling the UTILITY.
