Air Naturel Diffusair, Руководство пользователя

Страница: 7 / 10

Starting
Before switching on the device, check
that Diffusair is turned off.
·
Pull off Diffusair’s cover and tank cover.
·
Fill in the tank with cold tap water without
exceeding the ‘‘MAX’’ level.
·
Add 3 to 10 essential oil drops.
·
Replace the housing and tank covers then
plug the cord in an electrical socket.
·
The Diffusair is now ready to use.
·
Diffusair automatically switches off when the
tank is empty. Refill the tank and close it again.
·
The Diffusair is now ready to work again.
Operating instructions
Power switch (
⑤
)
·
Press the power switch once to turn the
device on.
·
Press the power switch a second time to
turn the LED light off.
·
Press the power switch a third time to
turn Diffusair off.
Timer (
⑥
)
·
One pressure on the ‘‘timer’’ button for
a continuous diffusion of 5 minutes.
·
Two pressures on the ‘‘timer’’ button for
a continuous diffusion of 10 minutes.
·
Three pressures on the ‘‘timer’’ button
for a continuous diffusion of 15 minutes.
·
Four pressures on the ‘‘timer’’ button for
a continuous diffusion of 20 minutes.
·
Five pressures on the ‘‘timer’’ button for
a continuous diffusion of 30 minutes.
‘‘Aroma Wave’’ Function (
⑦
)
·
Press once the ‘‘Aroma Wave’’ button for an
automatic switch between 5 minutes diffusion
and 10 minutes break.
·
Press a second time the ‘‘Aroma Wave’’
button for an automatic switch between 10
minutes diffusion and 20 minutes break.
·
Press a third time the ‘‘Aroma Wave’’ button
for an automatic switch between 10 minutes
diffusion and 10 minutes break.
The ‘‘Aroma Wave’’ function offers a better
perception of the aroma and helps in saving
essential oil.
Caution
·
Check that the housing is not swamped.
·
Do not use solvents or abrasive products when
cleaning the device.
·
Change the water in the tank at least once
every 72 hours (in case of occasional usage)
in order to avoid any bacteria growth.
Maintenance
Daily maintenance
·
Before any operation, unplug the device.
·
Empty the water from the tank and rinse off with
clear water in order to remove any eventual
scale deposit.
·
Dry the tank with absorbant tissue.
Monthlt maintenance
·
Fill the tank with 100 mL of water added with
a small quantity of white vinegar.
·
Dry the transducer, clean it with a soft brush
and wipe it with a soft tissue.
Storage
·
Clean as previously recommended with a white
vinegar-based solution.
·
Let the device dry.
·
Store in a dry place, preferably in its original
packaging. Avoid high temperatures.
7