Air Monitoring Solutions AMSP1001, Техническое руководство

Страница: 5 / 11

Technical Manual AMSP1001 Personal Sampler
AMSP1001 Personal Sampler Pump – Technical Manual
Part Number: AMSP1001, Revisions Date June 2015; Issue 2
Return to Contents
Page 2
Charger
Ensure the charger power supply has adequate ventilation.
Indoor Use Only
The battery charger is intended for indoor use only do not use outdoors.
Do Not Use a Damaged Battery Charger
Never operate a damaged battery charger (doing so shall void warranty and may result in injury or damage).
Battery Safety Warnings
Avoid Short Circuits
Avoid accidental short circuiting of any battery. Short circuiting battery terminals could an explosion, fire, burns
and serious injuries.
Do Not Use Damaged Battery Packs
Never attempt to charge a visibly damaged battery pack or one that has odours emitting from it.
This product contains a li-ion battery which may be dangerous if damaged. Contact AMS for inspection.
Disposal
Always dispose of used batteries in accordance to local regulations or alternatively contact AMS for further
advice.
Do not disassemble. Do not throw the battery into fire or heat. The battery may burst or generate toxic gasses if
heated.
Charging Frequency
The battery should be charged after every shift. Do not store a li-ion battery for a prolonged period in a
discharged state (doing so shall void warranty and will result in injury or damage).
Do not leave pumps turned on for a prolonged period once the battery has gone flat.
Contamination
Whilst the pump typically operates with a high internal positive pressure, it should never be assumed that the
pump is contamination free. Do not remove covers without taking suitable precautions to prevent escape of
contaminants.
Any products to be returned to AMS must be sent in a sealed labelled bag with a completed certificate of
decontamination stating if and what types of hazardous materials the pump has been exposed to.