Configuration
step 1.
For configuration, select the Outdoor AP on the
Hosts View
window.
step 2.
Right-click the Outdoor AP to open the popup menu (Figure 10).
step 3.
Click
Config
to go to the configuration window (Figure 12).
Figure 12. Config window — IP panel
Config Window – IP Panel
IP Address Setting: The Outdoor AP is a DHCP client. It will automatically ask the
DHCP server to assign it an IP address. An administrator can assign a fixed IP to an
Outdoor AP by unchecking the
Obtain IP Settings Automatically (by DHCP)
box
(Figure 12). You may also configure a subnet mask and add a default gateway.
If you assign a fixed IP address to an Outdoor AP, make sure that all Outdoor APs
within the same network have the same TCP/IP subnet address.
Obtain IP Settings
Automatically (by
DHCP)
Automatically retrieves an IP address for the Outdoor AP
from a Dynamic Host Configuration Protocol (DHCP)
server. This option is enabled by default.
IP Address
Manually assigns an IP address to the Outdoor AP.
22
Outdoor Access Point
Содержание WHP-1100
Страница 1: ...User s Manual Outdoor AP WHP 1100 WHP 1120 WHP 1130 ...
Страница 18: ...Hardware Description Figure 4 1 Outdoor Access Point and DC Injector 12 Outdoor Access Point ...
Страница 19: ...Outdoor Access Point Figure 4 2 Outdoor Access Point Installation Outdoor Access Point 13 ...
Страница 22: ......
