4. Web Management-Wireless and WAN Settings
AirLive WHA-5500CPE-NT User’s Manual
44
Disable MAC address control list:
When selected, no MAC address filtering will
be performed.
Enable GRANT address control list:
When selected, data traffic from only the
specified devices in the table will be allowed in the network.
Enable DENY address control list:
When selected, data traffic from the devices
specified in the table will be denied/discarded by the network.
To add a MAC address into the table, enter a
Mnemonic Name
and the
MAC Address
,
and then click
Add
. The table lists all configured MAC Filter entries.
To delete entries, check the corresponding
Select
boxes and then press
Delete Selected
.
4.2.15 Multiple SSID
Operation Mode -> Setup -> Multiple SSID
This function is available only for Access Point and AP Router modes. Multiple SSID
allows WHA-5500CPE-NT to create up to
4
different wireless networks (SSID). It is also
known as “Virtual AP” function. Each SSID can have its Encryption type, VLAN Tag, and
TOS settings. In the following diagram, the WHA-5500CPE-NT uses Multiple SSID
function to create separate Bridge and Client network. Each has its own encryption
policies.
Bridge Network
SSID: BridgeNet
Security: WPA2-PSK
VLAN ID: 200
Client Network
SSID: ClientNet
Security: WPA-PSK
VLAN ID: 100
Содержание WHA-5500CPE-NT
Страница 1: ...WHA 5500CPE NT 108Mbps 802 11a b g Multi Function Outdoor AP Firmware Version V 2 User s Manual ...
Страница 15: ...1 Introduction 9 AirLive WHA 5500CPE NT User s Manual ...
Страница 82: ...5 Web Management2 System Configuration Tools and Status AirLive WHA 5500CPE NT User s Manual 76 ...