manualshive.com logo in svg

Air Live POE-FSH2422G-390, Руководство пользователя

Поделиться
Скачать
Air Live POE-FSH2422G-390 Скачать руководство пользователя страница 28

4. Web Management 

 
 
 
 
 

 

AirLive POE-FSH2422G-390 User’s Manual 

 

23

4.8  Load default setting (Administrator menu) 

Clicking the Load button will make the switch being set to the original configuration. 

 

Load default setting 

 

Clicking the Load button will make the switch being set to the original configuration. 

Note

: It exclude to change user name, password and IP configuration. If you want to 

restore default setting including IP and user name password, then you can press the reset 
button for hardware base reset. More detail information about Load Default Setting - 
Hardware Base is described as following.   

The purpose of this function is to provide a method for the network administrator to restore 
all configurations to the default value. 

Step 1 

 

To activate this function, the user should follow the following procedures. Press the “Load 
default” button for 3 seconds until you see the LED blinking. 

Step 2 

 

When LED starts blinking, it means the CPU is executing the “load default” procedure. You 
can release the button now. 

After completing this procedure, all the factory default value will be restored. It includes the 
IP address, the user name, the password and all switch configurations. 

4.9  Firmware Update (Administrator menu) 

Before the firmware update procedure is executed, you should enter the password twice 
and then press Update button. The smart switch will erase the flash memory. There is a 
self-protection mechanism in the Boot Loader, so the Boot Loader will keep intact. Even 
though the power is turned off or the cable link fails during the firmware update procedure, 
the Boot loader will restore the code to firmware update page.   

Содержание POE-FSH2422G-390























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды