manualshive.com logo in svg

Air Live FE-501OD, Руководство пользователя

Поделиться
Скачать
Air Live FE-501OD Скачать руководство пользователя страница 43

5. Configuration 

 
 
 
 
 

AirLive FE-501OD User’s Manual

 

39

•

 Motion: This method will trigger the Camera video surveillance/recording 

operation whenever motion is detected within the defined days of the week and 
at the time of the set days.   
Each recording time-span is in accordance with the total value of Pre-event 
recording and Post event recording (in seconds). And the video record may be 
provided to host by E-mail/FTP, stored in the SD card, Remote Disk as 
selected or through all of them. 

 

 

•

 GPIO 

Input: On the defined days of the week and at certain time of the set 

days, the Camera will trigger its GPIO Input Signal when its state changes. 
Each recording time-span is in accordance with the total value of Pre-event 
recording and Post event recording (in seconds). And the video record may be 
provided to host by E-mail/FTP, stored in the SD card, Remote Disk, activated 
GPIO Output Port or through all of them. 

Содержание FE-501OD





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды