Air Live FE-200VD, Руководство пользователя

Страница: 59 / 72

5. Appendix
AirLive FE-200VD Manual 53
Your WAN IP Address will be listed here.
Note
: Because a dynamic WAN IP can change from time to time depending on your ISP,
you may want to obtain a Static IP address from your ISP. A Static IP address is a fixed
IP address that will not change over time and will be more convenient for you to use to
access your camera from a remote location. If you could not get a Static IP address from
your ISP, the DIPS™ or DDNS is a solution alternatively. Please refer to Appendix G for
more information.
(3) Open/set Virtual Server Ports to enable remote image viewing
The firewall security features built into the router and most routers prevent users from
accessing the video from the device over the Internet. The router connects to the Internet
over a series of numbered ports. The ports normally used by the device are blocked from
access over the Internet. Therefore, these ports need to be made accessible over the
Internet. This is accomplished using the Virtual Server function on the router. The
Virtual Server
ports used by the camera must be opened through the router for remote
access to your camera. Virtual Server is accessed by clicking on the
Advanced
tab of
the router screen.
Follow these steps to configure your router’s Virtual Server settings
• Click
Enabled
.
• Enter a unique name for each entry.
• Select
Both
under
Protocol Type
(
TCP
and
UDP
)
• Enter your camera’s local IP Address (e.g.,
192.168.0.100
, for example) in the
Private IP
field.