Air Live Ether-FSH2400N, Руководство пользователя

Страница: 22 / 26

5 LED Indicators
14
Ether-FSH2400N Fast Ethernet Switch User’s Manual V1.4.1
5
LED Indicators
Before connecting any network device to Ether-FSH2400N Fast Ethernet Switch, you should take a
few minutes to look over this chapter and get familiar with the front panel LED indicators of your
Switch. The front-panel LED indicators of
Ether-FSH2400N comprise 2 sets of LEDs: System
Status LEDs and Station Port LEDs. Each set of LEDs gives specific information concerning the
system status or the station port status:
Comprehensive LEDs
System LED
Power LED indicates the system power Status.
Station Port LEDs
Station Port LEDs show the port status of each of its sixteen 10/100 Mbps station ports. There are
Link/Act, FDX/Col LED, and 100M for each port.
The specific function of each LED will be described in full details in the following sections:
Power LED
Power LED will give a solid green light when you turn on the Switch, and will be off when the
Switch being turned off. You can simply check the Power LED to see if the Switch is being
activated. Before turning on the Switch, please verify that the power cord has been properly
connected to the Switch and the power outlet on the wall.
Diagnostic LEDs
The following LEDs have no function on Ether-FSH2400N. It is for Ether-FSH2400NS only.
Station Port LEDs
Power LED