7
MN-601
SmartAir
5. Using a butt connector, attach the 12 gauge wire from the terminal 30 on the back of the
relay to one end of the 20 amp fuse holder (
fi
g. 8).
6. If choosing to use the ring terminal, attach it to the other end of the fuse wire (
fi
g. 8).
7. Choose an appropriate 12+ volt source on the vehicle.
A direct connection to the battery is suggested.
NOTE
4. Splice the red wire with the 5 AMP fuse that is connected to the back of the relay to a
keyed on ignition wire (
fi
g. 7).
fi g. 7
8. Attach the terminal end of the ground wire to a clean section of the framerail using the
provided self-tapping screw (
fi
g. 9).
fi g. 8
fi g. 9
Inside View of
Connector
Splice into keyed
on ignition wire.
5 AMP
20 AMP
Back View
Optional Ring Terminal
Connect wire to a 12V
constant on power
source.
(Use terminal if
connecting to battery.)
Ground
30
85 86
87