background image

2

MN-282

Introduction

The purpose of this publication is to assist with the installation and maintenance RideControl  

air spring kit. The air springs used in RideControl kits are designed and manufactured like 

a tire. The air springs have layers of rubber and cords that control the bag’s growth and 

funnel it into one direction. The bags do not require a coil spring for control. RideControl 

kits utilize a sleeve style air bag that provides up to 2,000 pounds of load-leveling support. 

Each sleeve is rated at a maximum of 100 p.s.i.

It is important to read and understand the entire installation guide before beginning installation 
or performing any maintenance, service or repair. The information here includes a hardware 
list, tool list, step-by-step installation information, maintenance tips and safety information. 

Air Lift Company reserves the right to make changes and improvements to its products and 

publications at any time. Contact Air Lift Company at (800) 248-0892 or visit us online at 

www.airliftcompany.com for the latest version of this manual. 

IMPORTANT SAFETY NOTICE

The installation of this kit does not alter the Gross Vehicle Weight Rating (GVWR) or payload 

of the vehicle. Check your vehicle’s owner’s manual and do not exceed the maximum load 

listed for your vehicle.

Gross Vehicle Weight Rating: The maximum allowable weight of the fully loaded vehicle 

(including passengers and cargo). This number — along with other weight limits, as well 

as tire, rim size and inflation pressure data — is shown on the vehicle’s Safety Compliance 

Certification Label.

Payload:

 The combined, maximum allowable weight of cargo and passengers that the truck 

is designed to carry. Payload is GVWR minus the Base Curb Weight.

NOTATION EXPLANATION

Hazard  notations  appear  in  various  locations  in  this  publication.  Information  which  is 

highlighted by one of these notations must be observed to help minimize risk of personal injury 

or possible improper installation which may render the vehicle unsafe. Notes are used to help 

emphasize areas of procedural importance and provide helpful suggestions. The following 

definitions explain the use of these notations as they appear throughout this guide.

INDICATES  IMMEDIATE  HAZARDS  WHICH  WILL  RESULT  IN  SEVERE  PERSONAL 
INJURY OR DEATH.

INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN SEVERE 
PERSONAL INJURY OR DEATH.

INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN DAMAGE 
TO THE MACHINE OR MINOR PERSONAL INJURY.

Indicates a procedure, practice or hint which is important to highlight.

DANGER

NOTE

WARNING

CAUTION

RideControl

Содержание Ride Control 59516













Отзывы: