7
UG-681
WirelessAir
The TIRE ARROWS indicate which pressure settings (left, right or both) will be adjusted.
The numeric displays initially indicate the last setting sent to the currently selected manifold.
If there is no activity for 10 seconds, the WDC will return to
Sleep Mode.
The WDC responds to the switches as follows:
TOP
Press and release to increase the selected pressure settings by 1 PSI.
Press and hold to rapidly increase the selected settings. The maximum
setting is 100 PSI or 69 BAR.
RIGHT
Press and release to sequence the TIRE ARROW indicators through both
right and left. Only the pressure settings (left, right) having a TIRE ARROW
visible will be changed by thte TOP/BOTTOM switches
LEFT
Press and release to sequence the TIRE ARROW indicators through both
left and right. Only the pressure settings (left, right) having a TIRE ARROW
visible will be changed by the TOP/BOTTOM switches.
BOTTOM
Press and release to decrease the selected pressure settings by 1 PSI.
Press and hold to rapidly decrease the selected settings. The minimum
setting is 5 PSI.
MIDDLE
Quickly press and release to send the pressure setting to the selected
manifold (front or rear axle). See “Sending New Settings”.
Press and hold to switch between the front and rear axles (will only work
if a second manifold is linked).
P1/P2
Quickly press and release to send the preset #1 pressure setting to the
selected manifold (front or rear axle). Individual presets are stored for
each axle. The default value for preset #1 is 25 PSI. The default value
for preset #2 is 75 PSI.
The WDC is designed to be able to retain 2 presets for the front manifold
and 2 presets for the rear manifold. To store the current pressure settings
as the new preset #1, press and hold P1 until the display shows “Str”
(fig. 6).
Release P1 and the display will show “Str1” to indicate the settings have
been stored to preset #1 (fig. 7).
To store the current pressure settings as the new preset #2, press and
hold P2 until the display shows “Str” (fig. 6). Release P2 and the display
will show “Str2” to indicate the settings have been stored to preset #2
(fig. 8). Both preset settings are retained even when the WDC batteries
are removed.
fig. 6
fig. 7
