Operating Instructions
WARNING: DO NOT operate the humidifier without water in the tank.
WARNING: NEVER lift the tank off the Base while the unit is operating.
5
ON/OFF – Plug in to a standard (120V AC) electrical outlet. The LED Display will
turn on for 2 seconds then turn OFF. Press the ON/OFF button once and the
“Operating” indicator will turn on. Mist may not appear immediately; allow up to
15 minutes for water in the tank to transfer to the Base.
Mist Output – When you turn the unit ON, it will default to the lowest mist
setting. Pressing the “Mist” button ; each time will increase the output. Press
once for Medium, twice for High, three times for Supreme. Pressing the Mist
button a fourth time will bring the unit back to Low.
Humidistat – By using this feature the humidifier will automatically monitor and
control the humidity level according to your desired setting. Once the desired humidity
level is reached the mist will shut OFF until the humidity drops below the setting and
then the mist will turn back ON automatically to maintain the humidity level desired. To
set this feature press the “Humidistat” button to your desired setting. Settings range
from 40%-95% RH (Relative Humidity) in 5% RH increments. A 40%-60% Relative
Humidity is recommended. Once you set your desired humidity, the number will blink
three times and then the display will revert back to the Relative Humidity. To view the
set humidity level, press the Humidistat button once.
1
2
4
3
The Preset and Timer buttons allow you to set the humidifier to turn ON and OFF
automatically as desired.
Preset – The Preset feature allows you to program the unit to turn ON
Automatically. To use, press the “Preset” button once; you will see “Preset”
01:00H illuminated on the display. This feature works in one hour increments and
is programmable up to 24 hours. Simply keep pressing the Preset button until
you get to your desired Preset time, once you have reached the time the display
will flash three times and then will start to countdown until the unit turns ON.
Timer – The Timer feature allows you to run the humidifier now and set it to turn off
at a specific time automatically (in 1 hour increments from 1-24 hours). To use -
press the “Timer” button once; you will see “Timer” 01:00H illuminated on the
display. This feature works in one hour increments and is programmable up to 24
hours. Simply keep pressing the Timer button until you get to your desired time,
once you have reached the time the display will flash three times and then start to
count down until the unit turns OFF. The display will start alternating between the
current ambient humidity and the Timer. NOTE: You can use the Preset and Timer
functions together on this fully programmable LED Display to program the
humidifier to turn ON and turn OFF at your desired times.
5
7
6
LED/Dim – To turn OFF the LED Display, press the “LED Dim” button once. The
unit will remain working but without the the display illuminated. Press any
button to illuminate the display for one minute. Press the “LED Dim” button
once more to turn the display ON.
LOW Water – When the tank is out of water the “waterless” indicator will
appear in the display, you will hear three beeps and the automatic safety
shut-off will turn the Ultrasonic Nebulizer & unit OFF.
Automatic Use
Safety Shut Off
Extra Features
Manual Use
