Press the throttle and direction button together to achieve right forward, left
forward, right backward and left backward movements.
How to play
Mark
Channel A-D marked
Channel switch
Forward
Backward
Left
Right
Throttle
buttons
Throttle
button
The direction button on the right controls the
direction of vehicle’s front wheels.
Turbo button
Infrared transmitter
30 degrees
4.5 ft (1.5 m)
How to adjust the car to go straight ahead
Features
Rear Suspension
Change the channel of
the controller/charger
to the same channel as
marked on the vehicle.
Move ON/OFF switch to
the ON position as
shown. Vehicle must be in
the ON position to operate.
Turn OFF the Thunder Trucks™
vehicle when not in use to
preserve batteries.
NOTE:
The vehicle will go into sleep
mode if it does not receive a TX signal
or is idle for more than 3 minutes.
To wake the vehicle up, slide the
ON/OFF switch from the OFF
position back to the ON position.
1
Controls
3
4
5
2
ON
OFF
The throttle button on the left
controls the vehicle’s forward
and backward direction.
Press the turbo button
together with the throttle
button to accelerate.
Point the controller/charger directly at the Thunder Trucks™ vehicle.
Infrared rays can reach at an angle of 30 degrees
and 4.5 feet (1.5 metres).
When the Thunder Trucks™ vehicle does not travel in a
straight line, adjust the trim switch inside the truck.
Adjust
to left
Adjust
to right
Trim
switch
Suspensions are equipped on the front and rear
parts of the Thunder Trucks™ vehicle.
Change the channel to the
same as the mark on the
vehicle.
Direction
button
Front Suspension
Bottom View
Controller
