AIR GUARD AG-800X, Руководство пользователя

Страница: 5 / 16

5
Product Overview
Setting Up
Step 1: Place the vaporizer on a flat surface and in a suitably large area with at least 50 cm of open
space around the machine.
Step 2: Fill the fluid tank with Air Guard Antibacterial Solution.
Step 3: Connect the machine to a suitably rated power supply. To determine the power requirement
for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is properly grounded to
avoid risk of electrocution.
Step 4:
Turn on the machine and allow it to heat up, while the machine is heating up the LED status
light on push button will flash. Heat up takes approximately 2 minutes. Once machine reach
operating temperature, the LED status light will turn solid.
Step 5: To start making fog, press the push button located on the handle. Press the push botton
again to stop
Step 6: To turn off the machine, put the power switch to OFF position.
Wireless receiver
(antenna)
Manual ON/OFF
switch
Fluid tank
Tank cap
Power Inlet
cord
Power switch