Air-Con ASKCI4H4R18, Руководство по установке

Страница: 27 / 32

DC Inverter U-match Series Floor Ceiling Type Unit
24
20 H5 IPM protection
21 H6 DC fan motor error
22 H7 Drive desynchronizing protection
23 Hc Pfc protection
25 Lc Activation failure
26 Ld Compressor phase sequence protection
27 LE Compressor stalling protection
28 LF Power protection
29 Lp Indoor and outdoor mismatch
30 U7 4-way valve direction changing protection
31 P0 Drive reset protection
32 P5 Over-current protection
33 P6 Communication error between main control and drive
34 P7 Drive module sensor error
35 P8 Drive module over temperature protection
36 P9 Zero passage protection
37 PA AC current protection
38 Pc Drive current error
39 Pd Sensor connecting protection
40 PE Temperature drift protection
41 PL Bus low voltage protection
42 PH Bus high voltage protection
43 PU Charge loop error
44 PP Input voltage abnormality
45 ee Drive memory chip error
Note: When the unit is connected with the wired controller, the error code will be simultaneously
shown on it.
(2). Instructions to the Error Indicating Lamps on the Panel of the Floor Ceiling Type Unit.
States of the Indicating Lamps:
① .
Indicating Lamp of “POWER”: The indicating lamp will
shine when power on, while it will go out when power off.
② .
Indicating Lamp of “COOL” :
The indicating lamp will shine when “COOL” is activated,
while it will go out when “COOL” is deactivated.
③ .
Indicating Lamp of “HEAT”:
The indicating lamp will shine when “HEAT” is activated,
while it will go out when “HEAT” is deactivated.
④ .
Indicating Lamp of “TIMER”:
The indicating lamp will shine when “TIMER” is activated,
while it will go out when “TIMER” is deactivated or the set.
①
②
④
③
Fig.6.1