Air Comm Systems, Inc.
Page 4
Physical Installation
The ACS 775SL
-SP
is designed to be Dzus mounted and should be installed in the aircraft
using the Installation kit that is included. The above outline drawing of the unit with
dimensions will facilitate the installation. Be sure that adequate clearance is allowed for the rear
connector and cable harness.
The connector pin configuration of the ACS 775SL
-SP
rear connector and the recommended wire
size for the aircraft cable harness is shown on the following page.
n
Physical Dimension Outline for mounting
ACS 775SL
-SP
Installation and Operations
Manual Physical Dimensions
Unit Width Behind Face Plate
Front Panel Width - Standard Dzus Mount
Allow up to 2.500" For Rear Connector and Cable Clearance
VOLUME
OFF
NORM
EMER
MIC SEL
COM
COM
1 2 3
PA
1
2
3
Air Comm
ACS 775SL
XMIT
