Air Burners, Inc.
T-400 Air Curtain Trench Burner with Kubota V3600-TE Engine
OPERATING MANUAL
Page 25 of 34
(Vers. 09.15)
1. Before working on the machine to prepare for transport the fire must be complete-
ly extinguished.
2. Leave the manifolds extended, raise the rear jacks to lift the manifold from the
ground.
3. Remove the bolt securing the manifolds and fold them back using the handles.
The manifolds should be locked into position by lifting slightly into the storage
hooks on the carrier pipe.
4. Winch the carrier pipe into the trailer. (see Page 11 for “winch operation”). Never
push the carrier pipe with a vehicle, such as a front loader.
5. NOTE: THE FRONT END OF THE TRAILER SHOULD BE SLIGHTLY LOWER
THAN THE BACK; USE JACK STANDS TO ADJUST: THIS WILL MAKE IT EASI-
ER TO PUSH THE CARRIER PIPE BACK INTO THE MACHINE. IF THE TRAIL-
ER FRONT IS HIGHER THAN THE BACK ,THEN IT MAY CAUSE THE CARRI-
ER PIPE ASSEMBLY TO SLIDE BACK OUT OF CONTROL, CAUSING DAM-
AGE OR INJURY.
6. Fit the securing bolt at the front of the carrier pipe to lock the carrier pipe into posi-
tion.
7. Attach the trailer to tow vehicle.
8. Remove the jacks and store them. Use the storage box inside the top cowling.
9 Close the cowling and make sure it is secure with all three latches secured and
center “D” lift latch locked.
10. Connect the trailer and vehicle electrics and ensure that all lights and brakes func-
tion correctly before entering the highway.
11. Connect safety chains and secure hitch with suitable pin or locking device before
entering the highway.
HOW TO PREPARE THE MACHINE FOR TRANSPORT
DANGER:
CARE MUST BE TAKEN WHEN WORKING AROUND THE PIT.
THERE IS A RISK OF FALLING INTO THE PIT WHICH MAY RESULT IN SERI-
OUS INJURY OR EVEN DEATH.
DANGER:
FAILURE TO FIT THIS SECURING BOLT MAY RESULT IN THE
CARRIER PIPE DEPLOYING WHILE THE TRAILER IS BEING TOWED. THIS
COULD CAUSE DAMAGE, SERIOUS INJURY OR EVEN DEATH.
Содержание T-400
Страница 2: ...This Page intentionally left blank...