8
Set up of the Aroslim®
1. To insert a 250ml bottle of Air Aroma essential oil or aroma oil, lift the top piece (1) of
the Aroslim®.
2. Screw the bottle (2) into the diffuser. Make sure the thread is correctly aligned (do
not over-tighten).
3. Place the top piece back onto the Aroslim® pole. Make sure the tube (3) does not
get caught in between the top piece and the pole.
4. Click the adaptors plug plates into the DC adaptor then plug the DC cable and make
sure the lead/cord placed in the groove of the rubber pad.
5. The Aroslim® is now ready to use.
Tips for using the Aroslim®
1. Find a location in the room to place the Aroslim®, preferably not near a window or
reverse air duct.
2. Do not place the Aroslim® under or behind any other object, so that the fragrance
can diffuse freely in the room. Do not place any objects on top of the Aroslim®.
3. Do not lie the Aroslim® flat with an oil bottle inside the unit. The appliance should
always be in an upright position.
4. If the Aroslim is placed on carpet flooring, you may need to increase the height of the
feet to avoid blocking the air inlet.
Cleaning
1. The Aroslim® is fitted with a diffuser, which can get blocked if the unit is not cleaned
regularly or not used for a long time. The diffuser can be cleaned with methylated
spirits or alcohol.
2. Fill an empty 250ml Air Aroma bottle with a little methylated spirits or alcohol and
switch the unit on for about 30 seconds, repeat this 3 times and the atomiser will be
clean.
3. Oil stains or fingerprints on the Aroslim® exterior may be cleaned with a damp cloth.
4. Keep all connectors and sockets dry.
5. Don’t use harsh or abrasive cleaning agents or solvents.
1
3
4
2
9
Important: Make sure the bottle is screwed in tight and parallel to the top cover.
Содержание Aroslim
Страница 1: ...Designed by Air Aroma...
Страница 2: ...3 English Aroslim setup guide...
