EN
User’s Manual
4
Setting up your PadUnit
1. Stack PadUnit upon iBeamBLOCK Projector.
2. Power on PadUnit.*
*Power ON/OFF instruction of PadUnit
Package Content
•
PadUnit PAD-45
•
User Manual
Overview
Touch Panel
Micro SD Slot
Pogo Pins
Power Key
Vents
MicroUSB Conector
USB Conector
• Make sure Projector power is ON prior to mounting the PadUnit.
• It is recommended to wait until Projector displays “Waiting for PadUnit
/HDMI Signal” or searching signal frame.
• Power ON: Press and hold ‘Power Key’ of PadUnit for 3 secs to turn on.
• PadUnit Screen On/Off: Press ‘Power key’ of PadUnit to turn off the
screen , press again to turn ON the screen.
• Power OFF: Press and hold ‘Power key’ of PadUnit for 3 secs till the
screen shows “Slide to shut down your PC” then slide down the screen of
touch panel or Open the Win 10 Start menu, then tap Power
Shut down.
*Ensure to turn OFF PadUnit BEFORE turning Projector OFF.*
