WIRING DIAGRAM: KCW-D/B for Composite Video Output from a MYW-P1L/MYW-P3L
KCW-D/B
+
-
B1
B2
1A1
1A2
+
-
A1
A2
MYW-P1L/
MYW-P3L
PS-1820UL
MK-DAC
Composite
video output
DA1
DA2
DV+
DV-
+
-
KCW-D/B TERMINAL DEFINITIONS:
DA1/DA2 2-Wire input from MYW-P1L/P3L
DV+
Coax output: Center conductor
DV-
Coax output: Braided shield
b
Not functional
E
Not functional
+
Positive 18V DC
-
Negative
Output Signal:
75 ohm, 1V peak-to-peak
Coax: Solid copper core with copper braid
Pg. 3
Center to DV+
Braid to DV-
WIRING DIAGRAM: KCW-D/B for Composite Video Output from an MYH-CU
KCW-D/B
+
-
B1
B2
1A1
1A2
U1
U2
+
-
A1
A2
MYW-P1L/
MYW-P3L
PS-1820UL
MK-DAC
Composite
video output
DA1
DA2
DV+
DV-
+
-
KCW-D/B TERMINAL DEFINITIONS:
DA1/DA2 2-Wire input from MYH-CU Monitor
DV+
Coax output: Center conductor
DV-
Coax output: Braided shield
b
Not functional
E
Not functional
+
Positive 18V DC
-
Negative
Output Signal:
75 ohm, 1V peak-to-peak
Coax: Solid copper core with copper braid
Center to DV+
Braid to DV-
A1
A2
B1
B2
U1
U2
+
-
MYH-CU
KCW-D/B for Composite Video Output from MK-1GD, MK-2MCD, JA-2MCD, JB-2MD Monitors
The JA, JB, and MK series monitors include built-in video output as a standard feature. The
connector to access that output is provided with each of the JA and JB master monitors. The
connector for the MK series (Part #238150) is not included with the product, but can be
ordered separately.
While the KCW-D/B adapter will work as a video output device with these monitors, it is
recommended to use the built-in video output whenever possible. Refer to the MK/JA/JB
product instructions for further details about the built-in video output connection. If using the
KCW-D/B with these monitors, connect as shown above.
